Aim MXS Strada 1.2 Digital display street and race dash.
Aim MXS Strada 1.2 is available in two versions:
Watch Your Data in Pre-Configured Pages
Aim MXS Strada 1.2 shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more.
Custom pages is simple using AiM’s wide library of page styles. Defining which data is to easily shown. The end of scale and measure units. Swapping between pages is quite easy using the pushbuttons making the dash the choice of champions.
High Contrast TFT Display
Aim MXS Strada 1.2 shows with RPM scale, along with all the data you need, like speed, water temperature and oil pressure, lap times and much more. Choose the custom pages you wish, including up to four additional fields and much more.
Swapping between pages is simple with the Aim MXS Strada using the pushbuttons provided.
Flexible Shift Lights and Alarms
Ten multi-colored RGB shift lights on the Aim MXS Strada can be customised. Define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. Configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions, colours and you select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.
Two Digital Outputs
The Aim MXS Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.
This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
AiM Camera inputs, also for mirror camera
Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.
Expand the system according to your needs
AiM GPS Module for aim mxs strada 1.2
Thanks to AiM GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
It adds 4 K thermocouples.
LCU-One Lambda Controller for Aim MXS Strada 1.2
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.
Thanks to the SD Card, Memory Module records all your data in a file that to be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, also be connected via CAN-Bus to MXL2 and to all Aim loggers including AiM MXS Strada.
SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.
Aim MXS Strada Connection Examples
Race Studio 3
Race Studio 3 is the heart of your Aim MXS Strada 1.2 managing all your racing activities provides setting of channels for Link ECU Dash.
AiM MXS Strada Configuration
With Race Studio 3 you will be able to create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need Link MXS dash. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.
MXS Strada Analysis
With Race Studio 3, analyse all data recorded by MXG and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.
A wide range of data sources
Aim MXS Strada 1.2 is the dash logger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.
In The Box
- AiM MXS Strada 1.2
- USB cable
- 14 pins standard wiring
- 23 pins connector + contacts
- software installation CD