B-G Racing Hub stands
available for orders up to $2,000.00 Learn More
Price will depend on exchange rate at the time of order and freight method used (speed needed )
Harris Race Radios is the NZ distributor for the premium B-G racing equipment brand.
This advanced and proven equipment enables complete suspension and alignment set-up, ride heights, camber and toe angles at the hub without the wheels and tyres attached.
With HUBStands, set-up is far quicker and more precise than using tyres, with accuracy being measured to within 0.01 degree. The equipment also eliminates the need to constantly roll the car on and off the scales, greatly reducing the set-up time.
HUBStands Proline are height adjustable with a 15cm x 30cm (5.9” x 11.8”) low resistance, high load roller bearing wheeled base. Every set of HUBStands comes with one type of multi pattern hub plate that fits more than one bolt pattern per set. The interchangeable plates are available in a wide range of configurations and combinations to fit most makes, the majority of 4 & 5 bolt patterns, and also a small selection of hubs with centre locking nuts.
Each set also includes four unique Toe Sticks, precisely machined to fit perfectly parallel to the hub face at the top of the plates for “stringing” or at the bottom of the HUBStands for measuring total toe, and a set of stainless steel safety plates to prevent the HUBStand from rolling off the scale.
HUBStands are manufactured in theUSA, machined to the highest quality from 6061 T6 aluminium, and are suitable for cars up to a weight of 1700kg (3740lbs).
If you are not sure which application you need for your vehicle, please contact us via phone or email and we will be happy to discuss the options available.
The kit comprises of 4 machined aluminium HUBStands and a set of your choice of interchangeable, multiple bolt pattern hub plates, 4 toe sticks and 4 safety plates. Utilises low resistance, high load roller bearing wheeled bases that maintain 0.1mm height and 0.01 degree camber tolerance.
Additional Hub Plates
Allows one set of HUBStand bases to be used on more vehicles. Consists of 4 plates
Toe Stubs Extensions
attach to hub plates to space the toe sticks off the face of the hub to clear large calipers and grease caps. Consists of 4 pairs with fixing screws.
Centre Nut Collars
For GT type cars with single centre nut hubs. Consists of 4 collars, available for:
BGR-HS8010 – FERRARI 458 and GT3/CHALLENGE
BGR-HS8011 – FERRARI 430 and CHALLENGE
BGR-HS8012 – RADICAL SR3/8
BGR-HS8013 – BRITISH TOURING CAR
BGR-HS8019 – AUDI R8 GT3
BGR-HS8020 – PORSCHE 964, 993, 996 and 997
BGR-HS8021 – PORSCHE 991 CUP
BGR-HS8024 – GROUP 4 HUBS